The Performance Series 4-Blade Inducer is custom machined to replace your 3-Blade Standard Inducer, boosting performance of your Dual Impeller. You can expect more power, better vertical acceleration, improved fuel economy and less vibration due to cavitation. Our special 4-Blade Deep Pitch Inducer is intended to be used as a replacement for your existing 3-Blade Inducer. Not recommended for use with a main drive that is showing signs of severe cavitation burn. Before ordering check your Main Drive for signs of extensive wear or damage. Special tools may be required to remove your existing Inducer from the Main Drive. Shop for specialty Impeller Tools on our site.
Skat Trak 4-Blade Main Drive
Original Skat-Trak factory replacement Main Drive for Dual Impeller. Economical way to replace worn or damaged Main Drives by keeping your Inducer and replacing the Main Drive. Often only the leading edge of the Main Drive shows cavitation burn so there's no need to replace the entire Twin Drive Impeller. Fits only Skat-Trak Twin Drive Impellers. Must select year, make and model of your PWC. Let us know what Ski you have.
Skat-Trak Twin Drive Impeller
Our Twin Drive Impellers by Skat-Trak are specifically engineered & designed for use with all Hydro Gear including the Jetblade, Jetpack, Jet Lev, Jetovator, Flyboard & Hoverboard and other Hydro flight Equipment. This new Twin Drive Technology features a 4-Blade Main Drive coupled with a 3-Blade Inducer that fuels the Main Drive. Adding our Twin Drive Impeller to your Personal Watercraft will alleviate vibration at higher RPM's due to cavitation, increase vertical acceleration by as much as 30% and reduce fuel burn by up to 35%. Since all of our Twin Drive Impellers are custom made to meet the specifications of your PWC please allow 5-10 days for your order to ship. Impeller specifications vary by model and year of manufacture, select the brand of your PWC from the drop down list, then write in the year (example 2014) and model name/number (example FZR SVHO, RXPX-260) in the space provided.
We recommend having your Twin Drive Impeller installed by a Watercraft Mechanic. However, if you are mechanically inclined you may prefer to do the installation yourself. If you plan on installing the Twin Drive Impeller yourself, you will need to purchase a special tool set designed for your specific PWC which is sold separately. Follow this special tool link at the bottom of the page to order the proper tool set for your application.
Skat-Trak Performance Twin Drive Impeller
Our Performance Series Twin Drive Impellers are the culmination of development efforts between our partnership with Team Aquafly and the Technical Staff at Skat-Trak. This new Impeller features a proven Dual Drive design that is hydraulically matched to deliver more power, performance, altitude and vertical acceleration than ever before possible with conventional Impellers. These Performance Series Impellers feature a performance proven Quad-Blade Main Drive coupled to a Radical, Deep Pitch 4-Blade Inducer that delivers maximum water flow throughout the entire RPM range. For adaptability or other questions about our Performance Series Twin Drive Impellers, contact our Hydro Sales Team at (208) 777-5511 or by email to NWFlyboard@gmail.com.
Skat-Trak Impeller Installation Tools
Our Skat-Trak Twin Drive Impeller installation tool sets are configured to give you just the right special tools necessary to change out your Impeller on your own. These tools are specifically for removing your existing Impeller and installing a new Skat-Trak Twin Drive Impeller in your Personal Watercraft. Since these tools are specific to brand and model, please select the appropriate tools for your particular application from the Application selection box above.